We can offer you several options for pool modernization:

 

1. Improving the filtration and disinfection system of water in the pool:

a). sand replacement (sand should be changed every 3 years, and if the calcium level in the water is high - every 2 years. If the sand has turned into stone, it stops performing its filtration function, which leads to turbidity and premature greening of the water;

b). flushing of pipes (if not properly maintained and the calcium level in the water is high, the pipes and nozzles gradually become covered with a coating and, accordingly, their throughput capacity decreases);

c). installation of an automatic pH control system (a pH dispenser with a sensor and display allows you to automatically maintain a given level of acid-base balance of water in the pool, reduces the consumption of chemicals);

https://www.montelgroup.org/index.php?productID=503

d). installation of an automatic water disinfection system in the pool (disinfection by electrolysis. Special electrolysis units, when salted water (4-5%) passes through them, release active chlorine from the salt, which purifies the water from pathogenic microorganisms); https://www.montelgroup.org/index.php?productID=526

2. Reconstruction of the pool bowl:

- restoration of the pool waterproofing (elastic waterproofing ISOMAT or a more expensive option MAPEI)

- repair of mosaics

- replacement of the curb

3. Replacement of pool lighting floodlights (change 300W white floodlights to 20-42W RGB floodlights without losing the illumination of the pool. We simply change the floodlight itself, without affecting the bowl previously installed in concrete. You get savings on the power consumption of the lamp and protection from overheating of the floodlight, turned on without water)

4. Installation of a suspended counter-current ( https://www.montelgroup.org/index.php?productID=771 ) or a hydromassage chair ( https://www.montelgroup.org/index.php?productID=750 )

5. Installation of a water level control system in the pool and automatic top-up (Water in the pool has the property of evaporating and therefore it is necessary to constantly add it, otherwise its absence can lead to overheating and breakdown of the pump). ( www.montelgroup.org/index.php )

6. Installation of an automatic 6-way valve (installation of an electronic 6-way valve allows for automatic filter flushing at a certain time or when the set pressure in the filtration system is exceeded) ( www.montelgroup.org/index.php )

 

Modernization of the pool according to points 1c, d, 5 and 6 will allow organizing the operation of the pool in automatic mode, which is very important when renting out a house with a pool (after all, guests will not flush the filter and monitor the water level), as well as during long-term departures (the pump will not overheat, the filter will not burst from excess pressure, the pool will not turn green)